Opnunartímar

Mán.-Föstud. 08:00-17:00

Laug/Sunnud.   Lokað

 

Neyðarnúmer utan opnunartíma:

Grettir 660 9712

Benni 660 9704

 -    

« Til Baka | Setja í körfu | Prenta

Dósaborasett 19-64mm 19stk Co8
Vörunúmer: RK126303
Verđ: 23.414 kr.-
12 stk sett
Borar: 19-22-25-29-35-38-44-51-57-64
Haldari með miðjubor A2 og A4 stærð
HSS Co8
Fíntenntir
Mesta dýpt: 38mm
Hentar til nota á flesta málma

 

 

Bi-metal hole saws HSS Co 8 with fine toothing
The fine toothing is particularly suitable for cutting metals. It ensures smoother running and
reduces the necessary effort. The reduction in heat development during cutting increases tool
life, especially in the case of metals.
Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium
alloyed steels such as staniless steel, steels resistant to rusts and acids, non-ferrous and

light metals.

 

 

Bi-metal hole saws HSS Co 8 with fine toothing

Cutting edges: HSS Co 8

Jacket: special steel

Cutting depth: up to max. 38,0 mm (11/2")

Cutting teeth: HSS Co 8 with fine toothing

right hand cutting

 

Bi-metal hole saws HSS Co 8 with fine toothingThe fine toothing is particularly suitable for cutting metals. It ensures smoother running andreduces the necessary effort. The reduction in heat development during cutting increases toollife, especially in the case of metals.Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromiumalloyed steels such as staniless steel, steels resistant to rusts and acids, non-ferrous andlight metals.

 

 

Characteristics:

• High rotational precision

• Sturdy construction

• Hole saw and shank in two parts, so hole saws of different diameters can be exchanged and fitted more rapidly

• Positive chipping and cutting angles ensure more aggressive cutting

• The teeth are welded onto a jacket of special steel

• Good chip removal

• Slots in the jacket side assist removal of cutouts

• Exchangeable centring drill

 

User instructions:

• Unsuitable for percussion-drill operation

• Only slight pressure required to start drilling

• Drill with light, steady pressure

• Avoid pendulum movements while drilling

• Observe table of drilling speeds

• Use prescribed cooling agents

Fjöldi: