Kantfræsari KFM 18 LTX 3 RF 2x5,5 LiHD

Kanna á málningarsprautu SDNo-load speed: 12000rpm
Rated input power: 1600W
Output power: 900W
Type of edges: Chamfer
Max. chamfer width 45°: 21mm
Max. chamfer height at 45°: 15mm
Grading of cutting depth setting: 0.1mm
Curves smallest outer Ø: 100mm
Weight (without power cable): 6.9kg
Cable length: 4m
Noise emission
Sound pressure level: 93dB(A)
Sound power level (LwA): 104dB(A)
Uncertainty of measurement K: 3dB(A)
The most powerful cordless metal bevelling tool for 45° chamfers up to 4 mm and radii of 2 and 3 mm
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim milling head for working on tubes, on bores from Ø 13 mm, and on exterior contours
Parallel guide / rip fence for a uniform finish when processing straight edges
Battery pack can be swivelled for better access in hard to reach places
Overload protection: protects the motor from overheating
Electronic soft start for smooth start-up
Restart protection: prevents unintentional start-up after power supply interruption
Detachable dust protection filter protects motor from coarse particles
LiHD battery pack for ultimate performance, extremely long runtime and service life
Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.

Type of battery pack: LiHD
Capacity of battery pack: 5.5Ah
Battery voltage: 18V
No-load speed: 7000rpm
Type of edges: Chamfer and radius
Max. chamfer width 45°: 6mm
Max. chamfer height at 45°: 4mm
Possible radii: R2/R3
Grading of cutting depth setting: 0.1mm
Curves smallest internal Ø: 13mm
Weight (including battery pack): 3.1kg
Noise emission
Sound pressure level: 84dB(A)
Sound power level (LwA): 95dB(A)
Uncertainty of measurement K: 3dB(A)